The Expansion Tank Nobody Checks — Until It Fails

Every commercial building with a backflow preventer is a closed system. When water heats up, it expands — and it needs somewhere to go. That somewhere is the expansion tank.
It's also the part of the system nobody ever looks at.
An expansion tank doesn't fail loudly. The internal bladder gives out, the tank fills with water and stops doing its job, and from the outside everything looks fine. Meanwhile the building lives with pressure spikes, relief valves that dribble or dump water, and backflow preventers that start failing their annual tests for no obvious reason.
Left long enough, the tank itself rusts through — like the one in the photo above. That one came out of a client's mechanical room and was replaced with the new unit beside it. A rusted tank isn't just a failed part; it's a flood waiting for the wrong moment.
That's why a proper annual backflow test is about more than the device itself. At every test, the expansion tank should be checked too — its air charge, the condition of the bladder, and the state of the shell. Caught early, a tired tank is a planned replacement. Caught late, it's water damage, downtime, and an emergency call.
If nobody has looked at your building's expansion tank in years, it's worth having it checked at your next backflow test.
Van Horne Plumbing and Backflow — backflow testing, repairs, and surveys across the GTA.
Annual testing is $250 per device, with all municipal filing handled for you.
(416) 554-2213 · vanhorneplumbing.com



Comments